[splat]

JDM CTR lip is kinda on... as you see the coners have to be line up a little better.






Front is almost together.






This ad is not displayed to registered members. Register your free account today and become part of the Community.

[splat]

This is the only thing that sticks out, just a little bit of the header












A better pic of my rebar.




And last, my arm rest delete

[lilredhonda]

nice man. love it how much power do you think it put down?

[splat]

This hood came off my last purple ej6 after someone wrecked it. It came from Ground Design's 2000.....i dont think they are in business any more. Anywho, we were going to take my old OEM hood and cut it up, but when we started looking at this hood i was about to throw out, we thought we will play with this first. And its all fiberglass....so its easy to work with.

[splat]

Front and rear hooks on.




Rear lip was refitted ...but still has some gaping on the corners.



Now, i forgot i even had this kit Its called Korbach........frame locks. This is to keep the front bumper from twisting when going into a turn. So since the bumper was off i throw it on.






The hood.........i know im going to get a lot of crap about this, so.....my friend and i talked about what and how this thing will look like, after we talked we made up our mind.
The final product will be up next week.........so at this point, this is all i am going to show you all.

[splat]

Password JDM cooling plate.




Front Mugen strut bar on.....i still have to put the Mugen sticker on. + Tein hood shocks







Miracle cross bar Type 2



Now as you can see, the Rear Mugen strut bar where the spare tire would be.
I cant put it on right now because the bolts that came on the Coilover are to short,
So later ill rip them out and put longer bolts







Now on with the Hood.







On the other side of the shop, Don was fin up another J series swap, it only a little under 2 months.









This shot show's the motor sitting a little further back and a little higher then mine.

[splat]

My V-AFC2 Apexi Vtec Control.






Civic Type R X Peddles


New lug nuts by MUTEKI my friends say they look like little black Olive's......They say the stock chrome ones looked better.....i dont know.




Car sitting out side for a bit, took her around the block.......in 4th gear, the tires still chirped.




New air intake......filter.

[splat]

We lowered the vtec, this really helped...1 and 2 gear is really point less, but when 3 hit's, it just keep's pulling, little scary.
We also placed the new JDM style carpet in, need's to be stemmed to fit better.
We also raised the rear about a inch because the tires were hitting the inner quarters.......so i broke down and bought the fender roller, so after i roll the quarters ill slam the bitch.
Now we had a prob with the car, when it sit's at a light the auto ECU thinks the car is in 3rd gear, so the car ran like carp.....we Don at RPM Systems pulled it off again, he some how fig out a way to play with ECU and TB....and now the car runs 100% better.
I also asked him to install a small amp because my wife likes to listen to her music, so with the amp and two front speak's all i have to do is hook up her Zen and turn on a red switch and the music plays.
Oh, because Honda Day is next month we are now getting the front clip and rear bumper ready for paint.

[splat]

So just some pic's for my brother helping me with the hood.

some shots of the before and the after......we got hungry and the sun went down.












Working on it.








Now i have a real set of CTR mats......buy i dont want to use them, just use them for a show, so i hopped on Ebay and picked up this cheap crap.














Now for the seats, i went with the cloth RSX seats, they had a set of leather but the picked the cloth.
You must be asking why, well first, i have NO A/C so sitting in this car in the heat will kill me. And the leather seats were ripped.
Now the cloth seats are mint with 20K on them.....but because these seats are in a junk car, sometimes someone forgets to close the doors. So they are a bit dirty.
But not bad for a $100.00

Driver side.






Pass side.




Now they have 2 other sets for pass seat with good bags, i will have to rip one of those out to make them mint again.


Some pic of my rolled quarters.

[splat]

That's my brother, he's the one who painted my baby.
Thanks again Bro.




With the lights on.


On my way home we had to stop and get gas, i was sitting in my other car and my brother was driving my hatch and thought this would be a good pic.....sucks that my mirror was dirty.

[splat]

So this is just some pic's of the trunk with the FAL window and Spoon wing.









USDM 15' Integra Type R, picked them up cheap with tires.




With these new rims, this car should really move.....or just spin alot of tire =)

Plus, the Hybird shifter.
This thing is bad ass, really really well made, cant wait to try it out.

[splat]

Thats it for now,
The RSX seats are in, just have to find time to take some pic, working 70 hours a week can kill you.
There are some other things also, but i cant remember right now.
Till next time.

[Raid3n]

i love the custom hood man

Originally Posted by splat

working 70 hours a week can kill you.

Till next time.

no shit man. i work 8 hours a day and i feel like im killing myself already
how much dough did you end up with that build?

[Raid3n]

Originally Posted by jdm_type

sickest build ive seen. it will be more crazy if you boosted after wards! hahahaha
looks like a lot of time spent and invest and everything is going great so far
so keep us posted man. would love to see this bad ass gooooooo

Engine barely fit, where you gonna put the turbo! huh! lol

[splat]

Originally Posted by Raid3n

i love the custom hood man



no shit man. i work 8 hours a day and i feel like im killing myself already
how much dough did you end up with that build?

It can be done, but i want to go all N/A
My friend with the J32-S in the Eg shell, now thats already been turbo.