Throttle cable: 90 teg
Upper rad hose: 92 GSR trim to fit
Lower rad hose: 90 teg trim to fit
Clutch Cable: Stock
ECU: PR3 or PW0 also P28 *thanks ithas4wheels!*, but only works for obd1 conversion.
Trannys: S1 J1 A1 Y1 YS1
Axles 90-93 teg or SIR *for b16*
Axles 90-93 teg for b18 swap
Alternator….90 teg LS
Starter……...94 Del Sol Vtec
Head gasket…94 Del Sol Vtec
hasport also makes a b-series header for those with a b16 to retain the rest of their stock exhuast. Hasport Claims that you can still run your A/C with this header. A rarty with 4th gens
Clutch 90 Integra Clutch parts:
Pressure plate pressure plate p/n #22300 PR4 020
clutch disc p/n #22200 PR3 030
throwout bearing p/n #22810 PS1 01
Pilot bearing p/n #
Timing belt 94 Del Sol VTEC p/n #
Water Pump 94 Del Sol VTEC p/n #
Alternator belt 90 Integra, p/n # 31110-PR3-003
Distributor cap 90 Integra, p/n #
Plugs
Plug wires 92 Integra GSR p/n #
Parts B16A
ECU PR3 (90-91 Integra XSi or RSi), PW0 (89-91 Civic/CRX SiR) or ZDYNE one wire conversion ECU Engine wiring harness For port injected models use Hasport wiring conversion p/n #EFSi-VTEC
For dual point injected models use Hasport wiring conversion p/n # EFDX-VTEC
Axles EFBAX, or the EFBAX-Y1
Upper radiator hose 92-93 Integra GSR, Acura part number 19501-PR3-000. Trim to fit. Lower radiator hose 90-91 Integra, Acura p/n # 19502-PR4-A00. Trim to fit.
Throttle cable 90-91 Integra, Acura part number 17910-SK7-A03
Misc. parts If your car is a CRX HF or Civic Std (4 speed) you will need Knuckle and hubs from any other model Civic or CRX except the 90-91 Civic EX. If you want to use knuckle and hubs from the 90-91 EX, you will also need the calipers, rotors and brake lines. The EX has larger brakes.
B18
PR4 (90 91 Integra LS,GS) ECU
Upper radiator hose 90-91 Integra, Acura part number ----Trim to fit.
This ad is not displayed to registered members. Register your free account today and become part of the Community. 
07-02-2009, 02:42 PM
