DIY: How to wire Vtec

This is a discussion on DIY: How to wire Vtec within the Tips - Tricks - How to's - Guides - DIY's forums, part of the TunedTech's Features category; 1. Disconnect the 1P connector from the VTEC solenoid valve. 2. Measure resistance between the terminal and body ground. Resistance: approx 14—30 ohms 3.If the resistance is within specifications, remove ...


Register Search Today's Posts Mark Forums Read Members List Rules

  TunedTech.ca   TunedTech's Features   Tips - Tricks - How to's - Guides - DIY's

DIY: How to wire Vtec

Thank you for visiting the TunedTech Forums for the Car Enthusiasts. We setup this forum so you can chat and meet other car tuners and enthusiasts members online who have similar interests in cars. Our forums are for discussing everything from off topic to the best fuel injectors for your turbo setup. We know that not everyone has just one car, so our forum of many different cars allows you to chat about them all in one place!

Right now, You are currently viewing our boards as a Guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, view our gallery, play arcade games, chat box, upload content and access many other special features. Registration is fast and absolutely free ...

JOIN NOW FOR FREE!


Reply
 
LinkBack Thread Tools
Old 11-29-2010, 11:19 PM   #1
Home boy...
 
Raid3n's Avatar
 
Join Date: Oct 2008
Location: Your house
My Ride: 180sx
iTrader: (2)
Posts Perday: 2.61

Default DIY: How to wire Vtec

1. Disconnect the 1P connector from the VTEC solenoid
valve.

2. Measure resistance between the terminal and body
ground.
Resistance: approx 14—30 ohms

3.If the resistance is within specifications, remove the
VTEC solenoid valve from the cylinder head, and
check the VTEC solenoid valve filter for clogging.

• If there is clogging, replace the engine oil filter and
the engine oil.

4. If the filter is not clogged, push the VTEC solenoid
valve with your finger and check its movement.

• If VTEC solenoid valve is normal, check the engine
oil pressure.

This ad is not displayed to registered members. Register your free account today and become part of the Community.
__________________
H old
O n
N ot
D one
A ccelerating

Raid3n is offline  
 
Reply With Quote
Old 12-02-2010, 05:46 PM   #2
ttech Super Mod
 
jdm_type's Avatar
 
Join Date: Oct 2008
Location: USA
My Ride: Rb26det
iTrader: (0)
Posts Perday: 0.38
DefaultRe: DIY: How to wire Vtec
Good write up bro.. this would be very helpful
__________________
I might be a Full of shit, But its good shit!
jdm_type is offline  
 
Reply With Quote
Old 12-04-2010, 04:23 AM   #3
ttech Mod
 
89y49rexsi's Avatar
 
Join Date: May 2009
Location: salt lake city, utah
My Ride: my 2 feet
iTrader: (0)
Posts Perday: 3.02
DefaultRe: DIY: How to wire Vtec
very nice write up raid3n
__________________
--Yes I am aware my civic is 1.6L and your Mountain Dew is 2.0L
--"Having sex should be like driving a Honda, slow, obscene, and loud enough for the neighbors to hear."
--"RICE-Racing Inspired Cosmetic Enhancements"


RIP twinkie u will be forever missed
89y49rexsi is offline  
 
Reply With Quote
Old 12-04-2010, 10:37 AM   #4
Home boy...
 
Raid3n's Avatar
 
Join Date: Oct 2008
Location: Your house
My Ride: 180sx
iTrader: (2)
Posts Perday: 2.61
DefaultRe: DIY: How to wire Vtec
thanks guys.. if you guys got any! post them up here too
__________________
H old
O n
N ot
D one
A ccelerating

Raid3n is offline  
 
Reply With Quote
Reply

Bookmarks

« DIY: Replacing A Steering Rack | DIY: Rear Drum break shoe replacement »
Thread Tools




All times are GMT -6. The time now is 11:48 AM.

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
TunedTech™ © 2012