[89y49rexsi]

damn i wish i had the money so that i could buy this stuff thats being d=sold locally

Motor is as follows: $6500 Will Come with everything listed below.

LS block
GE Sleeves w/Orings
CP 84mm pistons with upgrades wrist pins
Manley rods
LS crank
Clevite Bearings
OEM Oil/Water pump
Race Fluidamper (will including removal tool)
LS oil pan Tapped
GE LS/Vtec Kit
GE 84mm head gasket
GSR Head
Fully Ported and Polished by Ryan@Warr heads
GSR Cams
Supertech Springs/Retainers
Supertech Inconel Exhaust valves
Bronze guides
Valve Job
High Amp Alternator
3 Distributors wired for the external coil, 1 LS, 2 GSR's
Custom built Breather kit using 2 Moroso Cans with 4 -12an Lines with return into the block
Valve Cover with 4 -12an fittings welding to it and powder coated Gloss Black
Edelbrock Intake Manifold (intake port matched)
Stock GSR throttle body
ETC ETC ETC I'm sure there's more I'm forgetting.

Turbo Kit: $4000 Comes with everything listed below

Full-Race T4 Twin Scroll Manifold
Garrett 4294 Journal Bearing
Dual Tial 44mm Wastegates with .7 bar springs w/dump tubes
IC piping Powder coated Gloss black
Precision 825hp Intercooler
Tial 50MM BOV (Black)
All couplers and T-bolts
4" Down Pipe w/flex
4" Aluminum Exhaust (All With V-Bands)


DriveTrain:
Liberty Dog Box transmission with Quaife (GSR ratios, B16 Quaife) $5000
Exedy Twin disc Clutch $1100
DSS 5.9 Axles w/hubs $1300
Avid Traction bars $300

Electronics: (None of this will be sold until I have at least the block and trans sold)

S300 with all options $600
PLX Wideband w/bosch sensor $200
AEM 5 Bar map Sensor $75
AEM Boost solenoid $75
MSD Digital 7 Plus Prog (#75314 4 cyl apps only) $700
MSD Dig 7 HVC II Coil $150
MSD was installed using shielded wiring that was grounded to reduce interference

Fuel: (Will be included in the chassis)

Aeromotive Eliminator Pump
Aeromotive FPR
-10an feed lines
-6 an into stock feed Return
Dual summit filters with 100 michron inserts (before and after the pump)
Full-Race tank sump
Bosch 1600cc injectors
Resistor box
Golden Eagle Fuel Rail

MISC Parts: (None of this will be sold until the block and trans are sold)
Hasport Solid Mounts Powder coated black $300
Del Sol Dual Core Radiator w/slim fan $100
Full Racing Suit (Pants, Jacket, Shoes, neck brace, gloves) $400
Spinwerks Drag Wheels (slick below included) $650
MT 24.5"x9" slicks
VIS Invader Carbon Fiber Hood $400

There might be more parts that I'll post up as I remember them.

Asking $26,500 OBO...

This ad is not displayed to registered members. Register your free account today and become part of the Community.

[lilredhonda]

mee too

[89y49rexsi]

this was the heart and organs of a 9 sec race car

[lilredhonda]

what was the car???

[89y49rexsi]

integra fuckin sick

[lilredhonda]

any pics of the car and thats alot for that cars like that around here sell for like 5-7k

[89y49rexsi]

dude this was built and had alot done to it you pay to go fast

[lilredhonda]

yeah i can see

[lilredhonda]

theres a dude around here who builds hondas and sell on craigslist


like fully built hondas........for tops i think 10k

[lilredhonda]

golden eagle sleeved b16 block

81.5 mm bore wiseco pistons

eagle rods

Skunk 2 pro one cams

super tech valve springs and retainers

unported head

NUEKIN top mount and 4 in down pipe

Gt 35-67 .82

a1000 fuel pump

sumped tank

10 an- feed

8 an- return

1200cc rc injectors

golden eagle fuel rail

golden eagle lower control arms

T1 Catch can

M&W Pro 10 ignition

twin disc clutch

JDM B16 with Kazza LSD

15" Rota Track-R's.

brand new bfgs 225s on the front

Falken Ziex 512 on the back


close to like 700hp


all for 10k

[89y49rexsi]

this came out of a 984whp car lol

[lilredhonda]

okay i could just turbo that car and it would be a 1000 hp civic

[89y49rexsi]

this is a very well built car and he is parting it out not selling the car this changes alot of shit

[lilredhonda]

true that wierd why would he do that

[89y49rexsi]

make more money that way lol